[Top] [All Lists]

[Towertalk] Antenna analysers

To: <>
Subject: [Towertalk] Antenna analysers
From: (Chris BONDE)
Date: Sat, 20 Jul 2002 10:51:57 -0700
Have you looked at the MFJ-259?  I understand that it does 160-2m and is 
less expensive than the 269?
Chris opr VE7HCB

At 11:49 PM 2002-07-19 -0400, mdg wrote:
>As I am still going back and forth between MFJ269 and VA-1 when
>contemplating my next ant. anal. purchase, here are some questions to
>those of you who know the answers... .
>I am posting those questions here as I tend not to rely too heavily on
>whatever I hear from the selling party... .
>1.  VA-1
>Autek claims the VA-1 measures impedance up to 1000 ohms. Is it the
>impedance as present at the input terminal or measured through
>calculations involving known feedline  impedance + other parameters ?
>What is the resolution of their A/D converter ?
>Has anyone verified the measurements with known networks hooked up to
>the analyser ?
>2. MFJ269
>Does this instrument sense the sign of the X ? . What type of bridge is
>utilized here ?.
>Since there are some preset line impedance values I presume I cannot
>measure an  impedance of an unknown (link coupled) LCR network ...
>unless I'd first terminate the coupling line with the known impedance
>etc etc.
> >From other correspondence I know this thing is darn accurate and not far
>away from the HP Vector analyser within it's capabilities but how stable
>(time) are those readings ?
>I must admit I like the 269 due to its ruggedness but I'd like to have
>an instrument that's capable of performing also other RF tasks around
>the shack and finally be able to MEASURE at least some of those unknown
>impedances/couplings that exist under the chassis...
>I'd appreciate your comments vy much.
>73 Art VE3PND
>Self Supporting Towers, Wireless Weather Stations, see web site: 
>Call 888-333-9041 to place your order, mention you saw this ad and take an 
>additional 5 percent off
>any weather station price.
>Towertalk mailing list

<Prev in Thread] Current Thread [Next in Thread>