On Thu, 25 Jul 2002 Pete Smith <firstname.lastname@example.org> writes:
> At 09:32 AM 7/25/02 -0400, Joe Mitchell wrote:
> >Hi Pete,
> >If your C3 is between the EF-240S and the guy wires, was the C3 not
> >Sounds like it was cleared of potential interference with the 240S
> but I am wondering how you did that.
When I modeled a 2L Yagi, I played with the reflector dimensions
to see where it would become 'invisible'.
Basically, any conductor Less Than 0.25 WL at the frequency of
interest is nearly invisible to a dipole driven element at 0.15 WL
spacing. Therefore ANY element tuned for 20M and above will
be nearly invisible to a 40M beam.
Note that 20M elements attached to a 24 ft boom end load that boom
to a resonant frequency around 7.5 MHz so the BOOM may couple to
40M elements IF the boom is parallel to the 40M elements.
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit: