I am going to install an unguyed, free-standing 30' high Rohn 25G tower =
and wish some information about various foundation requirements. =20
Some info I gleaned from the Rohn website state that I should imbed a =
short section of 25G in a 4' X 4' X 4' deep block of concrete =
reinforced with # 7 rebar on a 12" pitch/grid pattern.
Others at the local club suggest using the Rohn 25G self supporting =
1/2" thick plate that is anchored at it's corners with 5/8 " anchor =
bolts imbedded to a concrete block.
My plans for the tower are as follow: 1) the lightest HAZER system, 2) =
a CDII rotor and 3) a Mosley Mini 33 triband.=20
The Mosley published loading is 2.5 sq. ft.
Any comments about the various foundations and suggestions are =
73 de Mike K8KE
--- StripMime Report -- processed MIME parts ---
text/plain (text body -- kept)