That is ABSOLUTELY wrong!
You MUST use HEAVY DUTY thimbles when terminating cable grips to just
about anything except fittings that are specifically designed to be
directly attached to a grip (such as some ground anchor rods)
"Guy Olinger, K2AV" <email@example.com>
Sent by: firstname.lastname@example.org
07/28/2002 05:51 PM
To: "Sylvan Katz" <email@example.com>, "towertalk"
Subject: Re: [Towertalk] Coupling phyllistran to ehs
Loop the big grip on the lower end of the philly through the big grip
on the upper end of the ehs. Nothing else needed.
----- Original Message -----
From: "Sylvan Katz" <firstname.lastname@example.org>
To: "towertalk" <email@example.com>
Sent: Sunday, July 28, 2002 5:07 PM
Subject: [Towertalk] Coupling phyllistran to ehs
> What is the best way to couple phyllistran to EHS (e.g via an
> thimble to thimble, etc)?
> .. sylvan
> Sylvan Katz, VE5ZX
> Saskatoon, SK
> "A Novel Perspective of Amateur Radio Contesting" at
> Self Supporting Towers, Wireless Weather Stations, see web site:
> Call 888-333-9041 to place your order, mention you saw this ad and
take an additional 5 percent off
> any weather station price.
> Towertalk mailing list
Self Supporting Towers, Wireless Weather Stations, see web site:
Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
any weather station price.
Towertalk mailing list