Why are folks disconnecting the cap inside the control head? twice the
capacitance isn't going to hurt
anything as best I can tell. On air-conditioners when they install a start-up
kit they are simply
installing a second capacitor in parallel with the factor motor start
capacitor. What am I missing
"Mike Gilmer, N2MG" wrote:
> K1UO wrote:
> << I notice from the T2X schematic that the start cap is across pins 4
> and 8 of the connectors. If I cut the rotor cable about 5 ft up from
> the base of the tower and put the start cap and weatherproof housing
> there will I notice any difference in T2X start operation?
> Has anyone already tried this? I can leave the other start cap in the
> control head and just insulate those particular leads out at the tower
> Closer is better - many folks split the difference (between mounting
> right at the rotator - where it belongs - and leaving it in the control
> box - where CDE put it) and mount the cap at the bottom of the tower
> where it's accessible. Leave the start cap in the controller and just
> disconnect the wires on 4 and 8.
> Since you then have two "spare" wires from control box to tower base,
> you can then double up the the heavy (brake/motor) wires on 1 and 2 for
> some more benefit.
> Mike N2MG
> Self Supporting Towers, Wireless Weather Stations, see web site:
> Call 888-333-9041 to place your order, mention you saw this ad and take an
> additional 5 percent off
> any weather station price.
> Towertalk mailing list