It sounds like, from your original note, the capacitor may be on it's last
Let me suggest that you remove the old cap and throw it out. (I believe
W5FL had a very succinct and reasonable reason for NOT using two
capacitors.--wouldn't doubling up the caps violate the 'prime
directive'?--Do what the manufacturer says.)
Install the new cap at the tower base or at the rotator.
Double up the appropriate wires (I don't have a TT, so don't know it's
Five or six years from now, you are not going to remember the capacitor at
the tower when the rotator fails to turn and you replace the capacitor in
the control box and it still doesn't work, causing you to trouble shoot the
control box, buy some new cable to replace the old, and THEN suddenly
remember that capacitor you put up at the rotator five or six years ago.
> -----Original Message-----
> From: firstname.lastname@example.org
> [mailto:email@example.com]On Behalf Of Larry Emery
> Sent: Wednesday, August 14, 2002 4:38 PM
> To: Towertalk@contesting.com
> Subject: [Towertalk] RE: T2X start cap at tower replies
> Thanks all,
> 16 replies in short order and ALL say it will work much better
> than before! Also, many said that there is no need to remove
> the cap leads from the control box, just parallel the new start
> cap across the leads on 4 and 8 at the tower base and use BOTH caps!
> Thanks all...
> Larry K1UO
> --- StripMime Report -- processed MIME parts ---
> text/plain (text body -- kept)
> Self Supporting Towers, Wireless Weather Stations, see web site:
> Call 888-333-9041 to place your order, mention you saw this ad
> and take an additional 5 percent off
> any weather station price.
> Towertalk mailing list