Since your tower face "points" to your desired target (EU),
just take a 1/4 inch aluminum plate and drill holes for 4 U-bolts
(1-1/4 inch or 1-1/2 inch with PVC shims for the legs).
On Wed, 14 Aug 2002 "Mike Gilmer, N2MG"<firstname.lastname@example.org> writes:
> Been there... they sell Rohn 55 stuff but no mention of Rohn 25 or
> I've emailed them to see...
> Just to be clear, I don't need to tweak the antennas in azimuth at
> all -
> both of my towers were layed out so that one tower face "points" at
> Europe. So I don't "need" a stubby-mast kind of design which I have
> 73 Mike N2MG
> W1RG wrote:
> > Check out DX Engineering... They do that stuff..... ;->
> > http://www.dxengineering.com/
> > Mike Gilmer, N2MG wrote:
> > >Does anyone make a bracket for sidemounting a "fixed" yagi to
> Rohn 25
> > >or Rohn 45? I don't want any rotating devices; I'm picturing a
> > >plate with holes for U-bolts.
> > >
> > >Of course I can make this myself - just wondering if any are
> > >commercially...
> Self Supporting Towers, Wireless Weather Stations, see web site:
> Call 888-333-9041 to place your order, mention you saw this ad and
> take an additional 5 percent off
> any weather station price.
> Towertalk mailing list
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit: