Another possibility is that one of the feedlines between the Comtek Box
and one of the elements may have some problem, such as an open shield or
a contaminated shield (which has turned black), etc.
On Sun, 18 Aug 2002 "Guy Olinger, K2AV" <email@example.com> writes:
> How about one burned contact in the Comtek box? Or a contact not
> quite closing.
> You've solved the fence problems. The individual SWR tests proved
> that. What's left is unrelated.
> Would appear that the only thing that is left is the wiring and
> stuff in the Comtek box.
> Here's how you prove it.
> Unconnect the coaxes from the Comtek hybrid unit to the verticals.
> Take the NW coax and hook it to the NE port on the Comtek. Connect
> the NE coax to the SE port, etc.
> Now rerun the power dump tests. See whether or not the problem has
> miraculously rotated 90 degrees clockwise, that the 2% and 20% dump
> switch settings on the Comtek control box have changed.
> If the problem rotated, then it's in the antennas and we still have
> something interesting to discover, no matter how improbable.
> If the problem did not rotate it's in the Comtek box, and you need
> have it looked at.
> 73, Guy.
> I have a very nice looking three rail wood fence that now runs along
> my 4SQR.
> Removing the goat wire for over 350 feet, then putting up then
> adding wood braces that acted as insulators breaking up the goat
> another 100 feet on either side of the wood fence, has had an
> on the individual SWR's of the antennas. They are all now perfectly
> with 5KHz of one another- right around 3.540MHz- The SWR of the
> with the fence was up ranged from 3.540-3.640MHz-
> But the bad news is that I am still seeing the problems with the
> power port figures.
> They remained unchanged ranging from 2% up to 20% at the same
> frequency but
> switching antennas. They direction of how the array was pointing
> varying resonant points at different frequencies as it relates to
> power dumped into the Hybrid power dump port.
> So the main problem remains-But I've discovered something else.
> The power meter on the 756 Pro shows 100 watts output unless the VK
> is on. On the VK antenna, I can only get 50 watts out. I switched
> and the problem remains. How can it do this with a dummy load
> via a
> hybrid coupler device?? So now I'm getting close to figuring it out
> narrowing down things with the fence- The problem with the array
> to be
> between the rig's output and Comtek control box at the antenna- All
> else has
> been ruled out-
> Can anyone tell me why the max power out to the VK antenna is 1/2 of
> power out the other antennas? What possiblities can cause this in a
> What could the problem(s) be?? Or am I barking up the wrong tree
> thinking its
> the coupler? The F/B on this antenna is awesome between what I am
> and the reports I get-- If not for monitoring the power port watt
> meter, I
> would never of suspected a problem-
> That's all for now- I have several emails with good suggestions and
> that I update people on my progress- So there you have it- Open to
> ideas on solving the power output problem-
> 73 Paul N0AH
> Self Supporting Towers, Wireless Weather Stations, see web site:
> Call 888-333-9041 to place your order, mention you saw this ad and
> take an additional 5 percent off
> any weather station price.
> Towertalk mailing list
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit: