[Top] [All Lists]

[Towertalk] Phasing Lines For Stacks

To: <>
Subject: [Towertalk] Phasing Lines For Stacks
From: (
Date: Wed, 21 Aug 2002 19:25:25 -0500
I know I'm not answering your question, but here's what I did on my 15 and
20 meter stacks.  I used equal lengths of RG-213 from the antenna to a point
in between both antennas on the tower.  I then run equal lengths of hardline
from that midpoint to the switchbox.  There's no coax or hardline coiled up
anywhere.  BTW. I get hit by lightning too so I now mount the relays at the
bottom of the tower!


----- Original Message -----
From: <>
To: <>
Sent: Wednesday, August 21, 2002 06:01 PM
Subject: [Towertalk] Phasing Lines For Stacks

For years I have used stacks and have used two equal pieces of coax to each
antenna from the remote antenna swtch on the tower.  As anyone who has a
tower in Florida will tell you, the remote antenna switches on towers get
fried from lightning hits on a regular basis and it is really a pain to
replace them and wrestle all the phasing back onto a new antenna switch
couple of years.

At my new location I have been running parallel 75 ohm hardline of equal
lengths to each antenna and do all the switching BIP/BOP/TOP/BOTTOM in the
closet with the Ameritron antenna switch.  Obviously, the chances of the
boxes getting fried in there are just about nil.  However, since the top
antenna (in this case a 40 meter beam) requires an extra 100 plus feet of
coax, so the lower one has an extra 100 feet that must be coiled up outside
the shack...rather unsightly and unwieldy.

I have come across a huge amount of Heliax (1 3/8 inches) and am planning on
replacing the 75 ohm hardline.  I am still plannning on using parallel feed.
However, I don't want to waste the Heliax by rolling up the extra 100 plus
feet on the second line.  Plus again, it really takes up a lot of space.

The question however, is this. Must the two pieces of Heliax be exactly
in length?  Or, can they a multiple of a wavelength longer as measured by my
MFJ 259?  If so, do they have to be a full wavelength longer or can it be
just a multiple of a half wavelength?  My gut feeling tells me that
everything would be fine if added an extra full  electrical wavelength. I
think just using multiples half an electrical wavelength would put them into
out of phase.

I hope this post wasn't too rambling and would like to hear from the

Bill K4XS
Self Supporting Towers, Wireless Weather Stations, see web site:
Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
any weather station price.
Towertalk mailing list

<Prev in Thread] Current Thread [Next in Thread>