Hello to all...
I have a DB 410-D UHF folded dipole antenna that has a problem.
It is a 16 Bay antenna with 8 bays on the top section and 8 bays on the =
bottom section. The harness has apparently been cut and the two =
sections separated to make "two" antennas. =20
The harness seems identical on the top and the bottom sections. To =
join the two sections, it appears to have a length of coax running from =
the bottom of the bottom section to the top of the bottom section. The =
top section has a male N connector at the bottom, and the bottom section =
has a female N connector at the top. At the point where it seems the =
two harnesses would join, the connectors (which I assume was the =
standard DB Products molded "Y" type) have been cut off and pl259 type =
connectors were put on.
Does anyone have one of the DB 410-D UHF folded dipoles that they =
could tell me about??? I was wanting to put N connectors on the place =
where the harnesses join at the bottom of the bottom section and use a T =
adapter to connect the feedline. Anyone have any comments?
I have pictures available at http://www.k5rpd.com/radiopics.htm for =
those interested. Any help besides a comment about purchasing a new set =
of harnesses would be greatly appreciated!!!
--- StripMime Report -- processed MIME parts ---
text/plain (text body -- kept)