A TRAP is a TUNED CIRCUIT consisting of a coil and a capacitor.
The ATB34 used a coil and a capacitor consisting of a short piece
of coaxial cable, using the cable capacitance to tune the coil.
Modern Traps use the capacitance between an inner piece of
element tubing and the outer trap cover to tune the coil.
TUNING of the TRAP is CRITICAL.
You can't just replace an ATB34 coil / capacitor with any
modern trap and assume the element will be tuned for
some desired level of performance. You MAY be able to
use the element material and a trap designed for the A4
along with the A4 dimensions.
On Sun, 01 Sep 2002 08:10:32 -0400 John Silberman <firstname.lastname@example.org>
> I have two questions for the group. If I'm wrong, please correct me.
> 1. Some older tribanders had traps that have a sort of fiber trap
> cover, that is unavailable now. Because its fiber and not aluminum
> the modern traps, the cover is not electrically part of the trap and
> non-conducting material can be used to make a trap cover for
> weatherproofing? Unlike the late beams that have aluminum trap
> which are electrically part of the trap and have to be replaced with
> same thing. The antenna in question is an old Cushcraft ATB-34, the
> forerunner to the A4S.
> 2. Since the trap is just that, and not a loading coil, one
> should be
> able to replace the old style trap with a new style trap, and
> vice-versa, as long as they are replace in pairs on that element?
> may have to adjust the spacing between the 10 and 15m traps if they
> act as loading coils on the higher frequency?
> Self Supporting Towers, Wireless Weather Stations, see web site:
> Call 888-333-9041 to place your order, mention you saw this ad and
> take an additional 5 percent off
> any weather station price.
> Towertalk mailing list
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit: