You have it right Mike. That's how I set it up. I'd say that with your
set up you should have no problems, particularly with the extra height of
your tower. My guys are also insulated...the only thing I didn't mention -
using Phylistran cabling....I wish I knew the capacitance....all I can say
is it is a BIG cap...large spacing. Size is about 14 inches long, and
about 8 inches height and width. Good luck with your setup!
At 03:28 PM 04-09-2002, N5MT@aol.com wrote:
>Trying toget the shunt fed wiring correct in my mind so help me out with
>Your variable capacitor is say 2 ft off ground attached to tower by some
>You connect coax to center of var cap and the other side to brade and
>Center of var cap then goes up the wire that is about 30in from tower held
>up by hazer.
>I have tried something like this on mine and never got it to work so
>looking for hints.
>My 70 ft rohn 45 has monobander on top and guys are insulated so it should
>Thanks. 73 Mike N5MT
--- StripMime Report -- processed MIME parts ---
text/plain (text body -- kept)