There are at least TWO other significant differences between 20G and 25G.
The guage of the leg tubing is 18 guage for 20G and 16 guage for 25G. Also,
the OD of the solid Z bracing is 9/32" for 20G and 5/16" for 25G. There has
to be more than just one less horizontal and one less diagonal brace to
account for the fact that 20G weighs 30 pounds per section and 25G weighs 40
pounds per section. These two types of tower are DANGEROUSLY similar. One
time, even Rohn got confused and sent me 18 sections of 20G that were labled
25G. I discovered it while I was unloading the truck and noticed the weight
difference immediately . . . Apparently, Rohn's warehouse gorillas did NOT
notice it . . . Scarey . . .
----- Original Message -----
Sent: Wednesday, September 04, 2002 2:44 PM
Subject: Re: [Towertalk] I THINK its 25G
> In a message dated 9/4/02 1:48:48 PM Pacific Daylight Time,
> firstname.lastname@example.org writes:
> > So does this sound like Rohn 25G?
> How many horizontals are there? 20G has seven and 25G has eight. Other
> than that, they're just about identical.
> Steve K7LXC
> TOWER TECH