Yes, but the SWR curves are typically pretty broad, so
sensitivity is not the greatest. Better to put a wattmeter
between the T and the globar and look at forward power
at the harmonic. Forward power will be minimum at the
frequency that the stub is tuned match. This is generally
a very sharp null and will give a better indication of the
tuning of the stub than looking at passband VSWR.
I use a VSWR meter with adjustable sensitivity to perform
this measurment as this allows me to make the measurement
with a minimum of TX power (remember you are loading
up the rig into a dead short when you do this measurment).
An LMR-400 stub will provide 20 to 25 dB of rejection
at the 2nd harmonic, so for 10 watts of TX power you will
need a meter that is sensitive enough to see 10's of milliwatts
in order to properly resolve the null.
73 de Mike, W4EF...................
----- Original Message -----
From: "Tom Osborne" <email@example.com>
To: "TowerTalk" <firstname.lastname@example.org>
Sent: Friday, September 13, 2002 8:46 AM
Subject: [Towertalk] Stub tuning
> Hi All
> I have a big Globar 50 ohm resistor. If I hook it to one side of
> a "T" connector and the stub to the other side of the "T"
> connector, will it show minimum SWR at the right length of the
> stub for the band I'm making it for? Thanks and 73
> Tom W7WHY
> Self Supporting Towers, Wireless Weather Stations, see web site:
> Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
> any weather station price.
> Towertalk mailing list