[Top] [All Lists]

[Towertalk] plastic cover for I.C.E. boxes?

To: <>
Subject: [Towertalk] plastic cover for I.C.E. boxes?
From: (N2TK)
Date: Thu, 19 Sep 2002 15:52:10 -0400
Hi Ken. I buy a plastic box from K-Mart or Walmart. I get the kind with a
removable top. I spray the outside of the box and lid with a cheap solid
color paint. This seems to help the life of the box. These boxes don't seem
to hold up well outside without some form of UV protection. I make an
assembly of a piece of 1/8" aluminum plate that mounts to the base of the
plastic box. The plate is mounted on standoffs about 1" off of the bottom of
the plastic box. I mount this assembly to 2 aluminum channels that are
mounted to two legs of the tower. This gives good support for the box.

Now I mount lightning protection devices, coax switch, etc. to the aluminum
plate. I drill and tap holes to screw these items in place. I attach a heavy
ground wire to the aluminum plate. I attach the other end of the wire to a
tower leg using a zinc ground clamp.

Since the box is mounted vertical, I drill two holes in the side of the box
this is now the bottom of the box. The holes allow me to slip a short piece
of 1", or 2" plastic pipe through them. I take a female-to-female plastic
coupling. I cut into two pieces which will slip over the tubing. I use PVC
glue to sandwich the two sliced pieces of coupling with the tubing going
through the hole. This makes a nice point to bring in the cables.

Once I have run my cables through the hole(s), I stuff a small piece of
fiberglass insulation in the hole(s) to keep out the bugs.

If you would like a picture of this, let me know. Not sure my explanation is
the best.


-----Original Message-----
[]On Behalf Of Ken Hopper
Sent: Thursday, September 19, 2002 13:17
Subject: [Towertalk] plastic cover for I.C.E. boxes?

Dear TowerTalk guys,
I have both I.C.E. COAX lightning protection and rotor control cable
protection on my roof-top tower. Now that Winter is coming I am thinking
covering up those boxes with some sort of plastic wrap or outdoor tape? The
instructions say do not expose to direct WX (oops).

I tried some cheap TYVEC and Duct Tape and both shreded in a short time when
exposed to the sun and rain this Summer.  I can't consolidate them and
a weatherproof box for this yr - but maybe next yr.

What can I do to weatherproof the little boxes for this Winter WX?

Appreciate your suggestions. Mny TNX,
de ken n9vv
Self Supporting Towers, Wireless Weather Stations, see web site:
Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
any weather station price.
Towertalk mailing list

<Prev in Thread] Current Thread [Next in Thread>