Well, I see there is some confusion about the official Rohn part numbers for
the stuff we are talking about.
TA25 = Channel Torque Arm Assembly. This is the big triangle piece that
goes around the tower and requires 6 guy wires at one level. We are NOT
talking about this item.
GA25GD = Guy Bracket Assembly. This is bolt-on item that goes around the
tower in pieces for attaching guy wires to the tower. This is the item that
the Torque Bars in question attach to.
TB25D = Torque Bars with Sleeves Kit. This IS the item we are talking about
that has been added and removed from the Rohn list several times. These
bars normally attach to the GA25GD but the GA25GD can be used without them.
So, are TB25D's still made?
----- Original Message -----
From: "Jon Ogden" <firstname.lastname@example.org>
To: "Stan & Patricia Griffiths" <email@example.com>; "Jerry Kincade"
Cc: "Towertalk" <firstname.lastname@example.org>
Sent: Wednesday, September 18, 2002 3:52 PM
Subject: Re: [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question
> on 9/18/02 4:37 PM, Stan & Patricia Griffiths at email@example.com
> > Will a REAL Rohn dealer stand up and tell us
> > if torque arms are available from Rohn today?
> >From the Tessco catalog: Tessco Part Number 76524, Rohn Part Number:
> 25G Torque Arm Stabilizer. Tessco Price: $148.80
> Yes, they are still made. I believe the design is somewhat different now.
> But Tessco still sells the GA25GD guy bracket that uses the torque bars.
> So yes, it is still in use.
> Jon Ogden
> NA9D (ex: KE9NA)
> Life Member: ARRL, NRA
> Member: AMSAT, DXCC
> "A life lived in fear is a life half lived."