This is the trouble with "drawings" instead of actual photographs. They
leave out details that are actually there. No where on this page do I see
ANY reference to TB25D Torque Arms . . .
----- Original Message -----
From: "Mike Gilmer, N2MG" <firstname.lastname@example.org>
Sent: Wednesday, September 18, 2002 7:22 PM
Subject: Re: [Towertalk] Rohn 25 Guy Bracket/Torque Arm Question
> Look at the pic in the middle left side for the correct placement.
> Nice drawing, but what it doesn't show is the "bump" in the guy bracket
> horizontals where they pass over the z-brace at the tower welds (would be
> the right in the drawing).
> Mike N2MG