Now .. that is GOOD info! I have seen those glass rods used at commercial
sites, but never installed .. thought would be way too expensive! Tnx ..
73, Mark AA6DX
----- Original Message -----
From: <Cqtestk4xs@aol.com>
To: <towertalk@contesting.com>
Sent: Wednesday, September 25, 2002 1:41 PM
Subject: [Towertalk] Re: Cost of Phillystran
> As I stated before, Philly is the way to go. However, a good alternative
is
> the fiberglass rod.
>
> Not too long ago K4JA led a group of several guys who purchased a LARGE
> quantity of 11000 pound glass rod (I believe it was around 20000 feet or
so).
> Paul also arranged for a large quantity of custom made guy grips to be
> fabricated for the rod. I don't have the actual numbers, but I believe
the
> price came out to around $.40 a foot and the grips ran around $7.00 each.
> Paul did an outstanding job coordinating this and all the guys who
> participated saved a bundle. The cost came out to be 1/3 that of 6700
pound
> Phillystran.
>
> I believe all the hams who participated in the purchase have all the glass
> rod they need, but maybe there are others out there who might want to try
a
> group purchase. It is a viable alternative to EHS and Philly.
>
> Bill K4XS
> _______________________________________________
> Self Supporting Towers, Wireless Weather Stations, see web site:
http://www.mscomputer.com
> Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off any weather station price.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|