It is always bad to let the smoke out. It is very difficult to put back
in...
Hope you find a fix.
73
W1RG
George Skoubis wrote:
>Hi,
>
> I bought a Alpha Delta DX-A twin sloper to get on 160, 80, and 40 meters
>with one feedline.
>
> After getting the antenna mounted and tuned on 160 I saw a spot for a VP2
>station (CW). He couldn't hear me with 100 watts so I switched my amp on
>and tried again with about 500 watts, after calling him twice I noticed a
>burning smell in my shack (never a good sign in my experiences so far) so I
>stopped calling.
>
> I noticed smoke swirling out of my Fluidmotion SteppIR controller (I had
>left it and the rotater controller on since I had been using 20 meters) and
>at first I thought I had ruined the antenna controller. I changed
>frequencies and could hear the motors working so that wasn't the problem.
>
> What was the problem was the rotator controller beneath it. It still
>turns the antenna either direction but the indicator needle is stuck in one
>position and the overlap led is stuck on.
>
> Anyone have any idea on how to fix this short of sending it in? I would
>like to have it working by SS Phone weekend...
>
>Thanks,
>
>George / KF9YR
>
>
>_______________________________________________
>AN Wireless Self Supporting Towers at discounted prices,
>See http://www.mscomputer.com
>
>Wireless Weather Stations now $349.95. Call Toll Free,
>888-333-9041 for additional information.
>_______________________________________________
>Towertalk mailing list
>Towertalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
|