The six pin Molex at Radio Shack have the wrong size pins, too large, and
won't fit the Yaesu plug on the back of the control box. I tried that.
Jerry, K6JRY
----- Original Message -----
From: "Don Havlicek" <n8de@thepoint.net>
To: "Tom (KQ5S)" <KQ5S@arrl.net>
Cc: <towertalk@contesting.com>
Sent: Friday, November 15, 2002 6:32 AM
Subject: Re: [Towertalk] Connectors for Yaesu G-800DXA
> Six-pin Molex connectors, both male and female, are available at most
> Radio Shack Stores .. as are Nine-pin Molex connectors [good for rotor
> connections if protected from the weather!].
> Don
> N8DE
>
> Tom wrote:
> >
> > I am looking for a source to buy the 6 pin molex style connector and
> > the 7 pin round metal connector that is used on the Yaesu G-800DXA to
> > connect the rotator cable to the rotator and the control unit.
> >
> > An ideas where to get these connectors?
> >
> >
> >
> > --
> > 73,
> >
> > Tom mailto:trobertson@elp.rr.com
> > KQ5S
> >
> > _______________________________________________
> > AN Wireless Self Supporting Towers at discounted prices,
> > See http://www.mscomputer.com
> >
> > Wireless Weather Stations now $349.95. Call Toll Free,
> > 888-333-9041 for additional information.
> > _______________________________________________
> > Towertalk mailing list
> > Towertalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
> AN Wireless Self Supporting Towers at discounted prices,
> See http://www.mscomputer.com
>
> Wireless Weather Stations now $349.95. Call Toll Free,
> 888-333-9041 for additional information.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
|