[Top] [All Lists]

[Towertalk] Rohn rotator plate for 25G

To: <>
Subject: [Towertalk] Rohn rotator plate for 25G
Date: Tue, 14 Jan 2003 19:03:38 -0500
I'm surprised that nobody has designed a "two piece" Rotor plate assembly that 
can be assembled inside the lower section of the 25G tower to mount a rotor. 
I'm sure it can be done... Two thick "1/2 size steel plates strapped together 
with a pair of thick steel cross plates and four bolts++" would do it. It could 
be designed to "drop out" from under the rotor when the rotor needs to be 
yanked out, assuming a good thrust bearing is supporting the mast to the top of 
the tower. I have a crank-up, so I have no need for it. Anyone have autocad to 
make a drawing so it could be brought to a machine shop to cut the pieces out 
of steel, and drill the holes for the bolts? Just a thought.
George AB2KC

--- StripMime Report -- processed MIME parts ---
  text/plain (text body -- kept)

<Prev in Thread] Current Thread [Next in Thread>