[Top] [All Lists]

[TowerTalk] BCI to analyzers tuning transmatches

To: <>
Subject: [TowerTalk] BCI to analyzers tuning transmatches
From: (Dan)
Date: Wed Jan 29 23:56:04 2003
Hi Don: One of the locals here(K7OX) tried the 731 and it didn't give him
enough attenuation in his strong BCI environment. We finally used an MFJ
noise bridge with a battery powered SW receiver and no problem tuning his
tower on 160. 73, Dan, N5AR
----- Original Message -----
From: Don K5AQ <>
To: Rob Atkinson, K5UJ <>; <>
Sent: Wednesday, January 29, 2003 6:22 PM
Subject: Re: [TowerTalk] BCI to analyzers tuning transmatches

> The MFJ unit is the 731 and it can be tuned to null the BC station. I have
> 10KW AM station less than a mile from me so measurements are real fun,
> particularly on 160.
> The unit can be used with any analyzer if you can get a way to null the
> station. I recommend it.
> I have no connection with MFJ other than using some of their products with
> mostly good results other than their grid dip adapter which never worked
> me.
> 73  Don  K5AQ
> _______________________________________________
> TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>