[Top] [All Lists]

[TowerTalk] Digging the hole...after the "dig"

To: <>
Subject: [TowerTalk] Digging the hole...after the "dig"
From: (Jim Lux)
Date: Thu Feb 20 14:34:23 2003
At 02:07 PM 2/20/2003 -0500, wrote:
>    Its very common for us around here to pour the concrete "in the hole",
>using the hole itself as the mixing container. Of course the amount of
>rebar/cage construction will play a big part in that scenario. Just fill the
>hole partway with water, add sacrete, and mix well, and then repeat.  In a
>lot of cases it sure beats using a wheelbarrow and/or a big tub. You just
>need to be careful about loosening excess dirt etc during the mixing process.
>Its also very common to just pour "dry" sacrete around posts for fences, or
>support columns for sheds etc, and in a few days the sacrete has set up
>solidly  just from the moisture in the ground even tho no water was added.
>Its the same process as having a partially open bag of the mix harden and
>become unuseable just from the moisture in the air, but a lot faster.

If you had to get a building permit for the tower base, it's unlikely that 
the "mix in the hole" approach will meet the inspector's approval. Not 
enough process control to ensure that the structural properties of the 
concrete are what they need to be.  You might be able to "massively 
overdesign" to get around this.

Jim, W6RMK

<Prev in Thread] Current Thread [Next in Thread>