Why not make up a fixture using a laser level? They are
available today at very reasonable cost.
Strap the thing to one tower leg and characterize how far
off the leg the laser beam projects. (There is always some
offset of the laser beam from the surface upon which the
Use a jig or tape measure to see how far out of plumb the
Just a stray thought...
Pete Smith wrote:
> Just for the sake of discussion, why couldn't you just make up a little
> fixture that would hold the top end of a plumb bob contrivance, say 4
> inches out from a tower leg and in plane with one side of the tower?
> Make up an identical fixture for the bottom to serve as a target, wait
> for a moment with no wind, and voila.
> It seems like something like this could even be used as you added each
> guy set during the tower building process.
> 73, Pete N4ZR
> The World HF Contest Station Database was updated 23 Feb 03.
> Are you current? www.pvrc.org/wcsd/wcsdsearch.htm