Towertalk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[TowerTalk] End mounted VHF/UHF yagis - source

from [Mark Pride] [Permanent Link][Original]
To: <towertalk@contesting.com>
Subject: [TowerTalk] End mounted VHF/UHF yagis - source
From: mpride@us.ibm.com (Mark Pride)
Date: Fri Mar 14 11:00:05 2003 



Need recommendations from this illustrious group in the area of VHF/UHF
yagis that can be end- mounted, say 4 to 8 elements 144, 220, 432 MHz
(maybe 6 meters as well?).  Any good manufacturer suggested?  Please advise
and thanks!

Regards,

Mark, K1RX
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] End mounted VHF/UHF yagis - source, Mark Pride <=
Previous by Date:  [TowerTalk] Identifying ferrite core material, Jim Lux
Next by Date:  [TowerTalk] Identifying ferrite core material, Richard Karlquist
Previous by Thread:  [TowerTalk] Identifying ferrite core material, Robert Thain
Next by Thread:  [TowerTalk] Shack ground disconnect?, Rob Atkinson, K5UJ
Indexes:  [Date] [Thread] [Top] [All Lists]