Hello Roger,
Quite curious what comment the profs are coming with.....
Myself, I dont feel good at all when looking at your pictures Roger.
Just curious if my bad feeling is justified.
Jos on4kj
----- Original Message -----
From: "Roger" <rmurad@superig.com.br>
To: "towerTalk" <towertalk@contesting.com>
Sent: Monday, April 28, 2003 12:44 AM
Subject: [TowerTalk] How to fix a bent tower?
> TowerTalkians,
> I am in the [slow :))] process of installing a lattice, triangular, guyed
> tower. I plan to put a XM-240 and a 3 ele yagi for 12/17m at its top.
>
> The tower is all made on steel angle. Starting at the ten meters level,
the
> tower showed a slight inclination. I stoped the installation at the 16
> meters level and inserted some flat washers between two modules. That
> corrected the inclination.
>
> I'd like to know if what I did had compromised the tower. A much better
> explanation of the problem, including several pictures is at my WEB page:
> http://igspot.ig.com.br/rmurad/new-tower-install3.html
>
> Your thoughts will be much appreciated.
> 73 de Roger - PY1OL
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
|