[Top] [All Lists]

[TowerTalk] Erecting a 40' Universal tilt base tower

To: <>
Subject: [TowerTalk] Erecting a 40' Universal tilt base tower
From: (Dan)
Date: Thu May 15 21:18:19 2003
We have used an aluminum sectional ladder to push up a 60 foot aluminum
tower past the difficult area you mentioned. A rope, tied near the tower
top, was used to pull it up the last part of the raising. 73, Dan, N5AR

----- Original Message -----
From: Alan Young <>
To: <>
Sent: Thursday, May 15, 2003 5:32 PM
Subject: [TowerTalk] Erecting a 40' Universal tilt base tower

I am in need of some ideas on raising a tilt over base, 40 Universal tower.
It is aluminum, with a rotator, 20 lb 9 ft. mast and a Force 12 C3ss antenna
that is about 30 lbs.  The tower can be walked up hand over hand by myself
without the ant, mast, and rotator, but we tried with 4 large people and
couldn't get it past about 30 degrees.  No more leverage at our height.  Is
it possible and wise to attatch a line at the 30' level, route it above the
peak of a roof and use a vehicle to pull it up?  Any thoughts or
suggestioins would be most helpful.
Alan Young

See:  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>