We have used an aluminum sectional ladder to push up a 60 foot aluminum
tower past the difficult area you mentioned. A rope, tied near the tower
top, was used to pull it up the last part of the raising. 73, Dan, N5AR
----- Original Message -----
From: Alan Young <email@example.com>
Sent: Thursday, May 15, 2003 5:32 PM
Subject: [TowerTalk] Erecting a 40' Universal tilt base tower
I am in need of some ideas on raising a tilt over base, 40 Universal tower.
It is aluminum, with a rotator, 20 lb 9 ft. mast and a Force 12 C3ss antenna
that is about 30 lbs. The tower can be walked up hand over hand by myself
without the ant, mast, and rotator, but we tried with 4 large people and
couldn't get it past about 30 degrees. No more leverage at our height. Is
it possible and wise to attatch a line at the 30' level, route it above the
peak of a roof and use a vehicle to pull it up? Any thoughts or
suggestioins would be most helpful.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
TowerTalk mailing list