[Top] [All Lists]

[TowerTalk] J bolts for TX455

To: <>
Subject: [TowerTalk] J bolts for TX455
From: (David L. Thompson)
Date: Sun May 18 23:33:14 2003
I think you are talking about the bolts that hold the tower at the tilt over
points.  Mine were originally black steel but the bolts and base stay put
when you move the tower.  I have moved the tower three times and have used
1" galvanized universal bolt available at large hardware stores (they may
have to order for you) or McMaster-Carr.  They are 36" long plus a 6 " right
angle bend (mine were L's not J's).  A foundry or perhaps a Northern Supply
outlet can put bends in the bolts for you.
Dave K4JRB

> Anybody knows what the proper diameter is and length of the foundation
> bolts (J bolts) for TX455 crank up tower? Length of J section would also
> help but I think it is not important as much as lengths.
> 73 de Andy

<Prev in Thread] Current Thread [Next in Thread>