In a message dated 5/18/03 8:41:52 PM Pacific Daylight Time,
> I think you are talking about the bolts that hold the tower at the tilt over
> points. Mine were originally black steel but the bolts and base stay put
> when you move the tower. I have moved the tower three times and have used
> 1" galvanized universal bolt available at large hardware stores (they may
> have to order for you) or McMaster-Carr. They are 36" long plus a 6 "
> angle bend (mine were L's not J's). A foundry or perhaps a Northern Supply
> outlet can put bends in the bolts for you.
Actually the all-thread that is available at any hardware store is the
same grade as the anchor bolts.
US Tower doesn't supply J-bolts anymore; what you get are the anchor
bolts with a nut welded on the bottom end. That's all you need - do that or
put two back-to-back or epoxy one on and you'll be all set.
TOWER TECH -
Professional tower services for commercial and amateur