[Top] [All Lists]

[TowerTalk] telephone company non-sticky semi-solid stuff

To: <>
Subject: [TowerTalk] telephone company non-sticky semi-solid stuff
From: eric@K3NA.ORG (Eric Scace K3NA)
Date: Fri May 23 09:39:48 2003
   What happens with the adhesive when you re-open the connector?  Is it a true 
glue, or can it be cleaned off?

   Re: snot.  Ask your telco friends what it's really called and where it comes 
from, if you get a chance.  My curiosity has been
piqued.  Thanks for all the info.

   -- Eric K3NA

-----Original Message-----
[]On Behalf Of Dubovsky, George
Sent: 2003 May 23 Friday 09:16
To: Jim Lux; Towertalk
Subject: RE: [TowerTalk] telephone company non-sticky semi-solid stuff

There is also the adhesive-filled heat shrink; this stuff is usually
provided with hard-line connector kits. I have been using SPC Technology
type PHS polyolefin heat shrink at work recently. It has a 3:1 shrink ratio,
so it fits to coax connectors very well, and oozes a clear seal out of both
ends of the finished piece. When it cools, the glue solidifies, so it
doesn't get all over everything else. I have been getting it from Newark; it
is available in unshrunk IDs from 1/8" to 1.5". Newark's P/N 87N1382 is 1"
ID, for instance, and it will shrink down to 0.32".

geo - n4ua

p.s.: the telco folks I know just call that gel stuff "snot". That describes
it's annoying physical behaviors perfectly...

<Prev in Thread] Current Thread [Next in Thread>