The way that I did it was to lay it on paper using other buildings as a
reference for measurement. For instance, I put it 10 feet from one of the
corners of my house. On my scale drawing, I was then able to measure 30
feet from the corner of my house - I just made sure when I set the stakes
that I sighted down the edge of the house.
If you had no referents like I did, it seems you make a line that was the
length of the ground baseline (tower to guy footing) and sweep it in an arc
around the tower. Set one stake on the perimenter. Then, measure from that
point to the other candidate points on the arc. They should be equidistant
from the first guy.
----- Original Message -----
From: "Rich Hallman - N7TR" <email@example.com>
Sent: Sunday, June 08, 2003 3:25 PM
Subject: [TowerTalk] Tower Surveying Tools?
> Wondering what everyone is using out there as the "Poor Man's" Transit?
> Installing several towers and wondering what's being used to verify Guy
> anchors are 120 degrees from each other from the base point.
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list