[Top] [All Lists]

[TowerTalk] tower layout

To: <>
Subject: [TowerTalk] tower layout
From: (Henry)
Date: Mon Jun 9 00:36:19 2003
It's relatively easy to do with a long piece of string and a 100ft tape.
I can't describe it easily here due to my shortcomings and bad ascii art, 
but the jist is to use trig to get a couple of lengths and then use the 
string to repeat the measurements on the ground.

If you have the lengths of all the sides of one of the triangles formed by 
the tower and 2 guy points (from the trig) you can lay out the actual guy 
points easily. Send my an e-mail address and I'll send you a scanned 
drawing of the process.

It's really much easier than I've described it here.



<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] tower layout, Henry <=