Your requirements that the antenna support structure be both non-guyed
and a single pipe are somewhat mutually exclusive unless you decide on a
short tubular tower like the US Tower MA-40, but kept at 30 feet. (It'll
run you $849 from HRO, per their QST ad this month.)
If this won't work, I can suggest using three sections of Rohn 25
bracketed to your house (with appropriate internal reinforcement of the
roof/wall), sunk into the ground about five feet, with five feet or so of HS
steel mast plus your antenna/rotator. That ought to keep it invisible from
the street. The Rohn catalog claims that their sections have some amount of
self-support ability above a roof bracket. But the expense of three
sections of 25, plus two brackets plus reinforcing, etc might cost you
nearly as much as the MA-40.
Nevertheless, congratulations on your victory! Hope to hear you on
with the new aluminum soon.
Gene Smar AD3F
----- Original Message -----
From: "Bill Axelrod" <email@example.com>
Sent: Thursday, June 19, 2003 4:13 PM
Subject: [TowerTalk] Advice requested
> I finally have gotten the go-ahead from the neighborhood antenna police
> (read home owners association) to put up a mini beam on a mast at about 30
> ft or so. That's a pretty big breakthrough.
> So, before I get too deep into it, I would appreciate some advice from the
> Tower Talk community.
> One. What mini beam would you recommend and why? Hex Beam? Cushcraft
> MA5B? Force 12 C3SS, etc.? Any directivity and gain is better than my
> current wire and vertical antennas. Am interested in all bands 20 thru
> Low profile and keeping the neighbors from attacking are the paramount
> considerations. They don't see lots of aluminum in the air as a thing of
> Two. A "real" tower is out of the question. They'll allow me a "TV type"
> mast as long as it and the antenna are not visible from the street. That
> limits the total height to 30 ft or so. And guy wire/ropes are pretty
> much a no go for perceived aesthetic reasons. Since a mast with antenna
> usually requires guys, this restriction adds a challenge. I do have a
> with a 6x6 corner support that is buried in concrete. The top is about 12
> feet up off the ground. Perhaps I could anchor a mast there with some
> of support and thrust bearing in lieu of guys.
> Am open to all suggestions and advice.
> I'm sure there are some good ideas out there. Thanks in advance for the
> help and (hopefully) for no flames.
> 73... Bill K3WA
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list