It's only for novelty. My nearest neighbor is 1/2 mile away and nearest
airport is five miles. I have one for my other tower and I use a 12v R.V.
bulb inside. Much easier to run 12v than 110 up the towers. I found my
current light fixture at a ham swap 25+ years ago.
From: R.Morris [mailto:email@example.com]
Sent: Monday, June 23, 2003 2:25 PM
Cc: KFisher@schsa.org; firstname.lastname@example.org
Subject: Re: [TowerTalk] Red light for the top of a tower.
> In a message dated 6/23/03 11:24:22 AM Pacific Daylight Time,
> KFisher@schsa.org writes:
>>I'm looking for a place to purchase the bracket,base,red glass housing and
>> the 12v Bulb 25 +/- watt, for mounting on the top
>> of my tower.
> What is this for? Why do you think you need it?
> It doesn't sound like an FAA compliant lamp - they're 120V and 300
> watters I'm pretty sure.
> Steve K7LXC
> TOWER TECH -
> Professional tower services for commercial (where I've changed lots of
> and amateur
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
Confidentiality Notice: This email is intended only for the person(s)
identified above. It contains information which may be privileged, confidential
and/or exempt from disclosure under law. If you are not the intended recipient
of the email, you are hereby notified that you should not review the contents
of the email, and that any review, dissemination, distribution or copying of
this communication is strictly prohibited. If you received this in error,
please notify us immediately at Helpdesk@schsa.org. Also, please either
forward the email to Helpdesk@schsa.org, or destroy it in such a way that it
cannot be accidentally redisclosed. Thank you