[Top] [All Lists]

[TowerTalk] Rotor Wiring Sequence Help

To: <>
Subject: [TowerTalk] Rotor Wiring Sequence Help
From: (
Date: Fri Aug 1 10:00:42 2003
In a message dated 7/31/03 9:21:43 PM Pacific Daylight Time, writes:

> I have an old CDE TR-44 rotator that I am planning on putting up this
>  summer. Unfort. I have misplaced the "stone tablet" data sheet showing the
>  wiring interconnect.
>  It is an 8 wire unit and was hoping someone might be able to tell me what
>  the correct wiring sequence is between the control head and the rotor unit
>  itself.

    Sure - connect control box terminal 1 to rotator terminal 1, 2 to 2, 3 to 
3, etc. 

    If you've got any of the plug pigtails, then you'll need the specific 
pin-out for the plugs. 

Steve     K7LXC
<Prev in Thread] Current Thread [Next in Thread>