if there is biger wires thay go on the motor I WOULD think
----- Original Message -----
To: <firstname.lastname@example.org>; <email@example.com>
Sent: Friday, August 01, 2003 9:00 AM
Subject: Re: [TowerTalk] Rotor Wiring Sequence Help
> In a message dated 7/31/03 9:21:43 PM Pacific Daylight Time,
> firstname.lastname@example.org writes:
> > I have an old CDE TR-44 rotator that I am planning on putting up this
> > summer. Unfort. I have misplaced the "stone tablet" data sheet showing
> > wiring interconnect.
> > It is an 8 wire unit and was hoping someone might be able to tell me
> > the correct wiring sequence is between the control head and the rotor
> > itself.
> Sure - connect control box terminal 1 to rotator terminal 1, 2 to 2, 3
> 3, etc.
> If you've got any of the plug pigtails, then you'll need the specific
> pin-out for the plugs.
> Steve K7LXC
> TOWER TECH
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list