Electrical wire makes a great pull "rope". Don't forget to use a generous
amount of pull lube.
----- Original Message -----
From: "Jim Idelson" <email@example.com>
To: "TowerTalk Post" <firstname.lastname@example.org>
Sent: Friday, August 01, 2003 23:11
Subject: [TowerTalk] Re: Pull rope twisted in conduit
Thanks for all the replies. I went out and got a 125 foot fish tape at the
Depot. It went completely through the conduit without any resistance
whatsoever. I think the new plan is to take out the cables that I just
installed and the pull rope, which are all twisted up. Then I'll pull the
cables back through individually. Can't believe how easily the fish tape
through. Makes me wonder if I should keep a pull rope in there at all.
Jim Idelson K1IR
---------- Forwarded Message ----------
FROM: Jim Idelson <email@example.com>
TO: TowerTalk Post <firstname.lastname@example.org>
DATE: Fri, 1 Aug 2003 10:51:18 -0400
RE: Pull rope twisted in conduit
I pulled a couple of small cables through my 100 foot 3" conduit that goes
the house to the tower. This time it was extremely difficult. I can't even
the cable another inch. I'm lucky that it's just sticking out the other
Seems like the pull rope is twisted around some of the cables; and getting
worse every time I pull something else through. What's the best way to deal
A. Start using cable pull lubricant and don't wory about it?
B. Fish a new pull rope through the conduit? If this is the right answer,
what's the right way to do it? This sounds like the proper thing to do, if I
can figure out how.
Jim Idelson K1IR
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
TowerTalk mailing list