i would think of 2 or 3 or 4 of the 2 in black stuff used for well piping
pellyurathin (not spelled right)
street lights are wired with it and thay plow it in leaving 4-6 ft at each
street light and pore the concreat arould it and cut the black out sides
off to leave the 3-4 wores like 8-6-4 ga al. i bet
----- Original Message -----
From: "Mike Gilmer, N2MG" <email@example.com>
Sent: Monday, August 04, 2003 1:42 PM
Subject: [TowerTalk] Buried conduit (was Pull rope)
> I'm planning on running all my wires through the
> cheap, corrugated black 6" tubing. At first it looks
> like the pipe might be less than ideal (all the
> corrugations appear to be snag "magnets"). However,
> if I make certain that the leading edge of the wire
> bundle is rounded over well, I don't see it being much
> of a problem (famous last words) to pull it through.
> Has anyone had experience with this black stuff?
> An obvious plus: creating gentle bends in the pipe as
> it is installed will be easier than with the "hard
> I plan to bury a second empty one in the same trench
> for future use.
> Mike N2MG
> PeoplePC: It's for people. And it's just smart.
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list