Well .. here comes the non-engineer solution .. I used HEAVY DUTY stainless
hose clamps for that. Never had a problem. Of course, that depends on the
weight of the mast, and if you've stuck an 8? M 3 el mono on top I would
not recommend! A schedule 8? 21' mast worked out OK though...
Shucks .. standing by for important flames! HIHI..
----- Original Message -----
From: "Larry Emery" <email@example.com>
Sent: Monday, August 04, 2003 3:30 PM
Subject: [TowerTalk] Mast Collars
> Somewhere...recently...I read about using a 'Split Collar' to help hold a
> above the thrust bearing while extending the mast above the tower before
> installing the rotor. Hope this makes sense?
> Question here is where can one get those split collars?
> Thanks, Larry K1UO