[Top] [All Lists]

[TowerTalk] Reverse rotation on Ham IV

To: <>
Subject: [TowerTalk] Reverse rotation on Ham IV
From: (Mike Gilmer - N2MG)
Date: Mon Aug 11 11:40:35 2003
As was stated earlier, the large wires on terminals 1 
and 2 are for the brake.

Terminals 5 and 6 are for the motor (plus 1 for 
common). But don't take my word for it - check the 

-Mike N2MG

VA3PL wrote:
> I think I goofed somewhere with control cables (too 
> many connectors and too many splices) to the rotor 
> and the rotor is rotaiting the other way. When I 
> press CW it rotate CCW. It is like CW and CCW are 
> reversed. What happen if I reverse wires connected 
> to pin 1 and 2? Will the rotor rotate 
> the way it should?

PeoplePC:  It's for people. And it's just smart. 
<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Reverse rotation on Ham IV, Mike Gilmer - N2MG <=