A good 10 amp relay works! JACK
----- Original Message -----
From: "RCARIELLO" <RCARIELLO@si.rr.com>
To: "YCCC" <firstname.lastname@example.org>; "FCG" <email@example.com>; "Towertalk"
<Towertalk@contesting.com>; "ECC Reflicter" <EmpireCC@yahoogroups.com>
Sent: Wednesday, August 13, 2003 7:23 PM
Subject: [YCCC] Relays in RF usage UPDATE
> I just received my copy of Worldradio September 2003.
> There is an article by Kurt N. Sterba on page 34, Aerials SWR and Voltage.
> Second paragraph "voltage goes up as the square root of the VSWR. So, with
> 3:1 VSWR, the voltage and current are only 1.7 times greater then with
> A 50-Ohm perfectly matched line with 1500 watts power will have a voltage
> 274 volts. With 10:1 SWR the voltage will be 866 volts."
> I will have to recalculate my power chart I sent using this new
> Any comments??
> Rich AA2MF
> YCCC mailing list