Mike, if you go to the MaxGain quad website, I believe they make
recommendations for painting quad spreaders to protect them from the
effects of UV exposure.
Mike Gilmer - N2MG wrote:
>I have a used M2 40M3L antenna that I am putting back
>together and I noticed that the fiberglass insulating
>parts are starting to "fray" - i.e., the glass fibers
>are separating somewhat, giving the surface a "fuzzy"
>feel. I suspect UV is the cause.
>I would like to protect the fiberglass from further
>damage. I considered using 3M #88 electrical tape as
>a "wrap", but is there something more suitable for
>PeoplePC: It's for people. And it's just smart.
>See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
>Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
>questions and ask for Sherman, W2FLA.
>TowerTalk mailing list