Any fiberglass, no matter how UV-stabilized, will eventually degrade after
prolonged exposure to sunlight. Make your fiberglass spreaders and booms
last many years longer-and decrease their visibility by spray painting them
flat black. First clean and/or degrease them with a solvent such as acetone
or methyl ethyl ketone...(be VERY careful when using MEK... Follow
cautionary notes supplied with MEK) Apply a good primer, and allow the
primer to cure at least two days. Apply a top coat of flat black paint.
Never be afraid to try something new.
Remember, amateurs built the ark,
professionals built the Titanic...
...73, Larry - W1GOR
----- Original Message -----
From: "Mike Gilmer - N2MG" <email@example.com>
Sent: Monday, August 18, 2003 11:08
Subject: [TowerTalk] Sunlight protection for fiberglass
> I have a used M2 40M3L antenna that I am putting back
> together and I noticed that the fiberglass insulating
> parts are starting to "fray" - i.e., the glass fibers
> are separating somewhat, giving the surface a "fuzzy"
> feel. I suspect UV is the cause.
> I would like to protect the fiberglass from further
> damage. I considered using 3M #88 electrical tape as
> a "wrap", but is there something more suitable for
> Mike N2MG
> PeoplePC: It's for people. And it's just smart.
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list