|Subject:||Re: [TowerTalk] Gamma match|
|From:||Jim Lux <firstname.lastname@example.org>|
|Date:||Fri, 22 Aug 2003 14:09:51 -0700|
At 04:37 PM 8/22/2003 -0400, you wrote:
Wow....thanks Jim....I think I need to educate myself a lot before attempting answer to this. I never thought that driving stepper motor is so simple. Well I am looking a simple solution to this. I think I saw a guy at the flea market selling big stepper motors. They were nice and shiny looking devices but I think too complicated for what I know about them. I thought that just simple motor with gear box will do. I think I need perhaps 1/3 or better 1/4 rev/sec and I can tune in small bumps of the motor.
If you need small bumps, a gear motor is a better way to go. Take a look at the black and decker electric screwdriver and see if it's the right kind of speed and torque. They're real easy to modify, and they have the advantage that you can usually find an appropriate connection that fits the hex socket on the end. They run off 3-4 Volts, but almost any run of the mill wall wart will turn it.
Steppers are easy to use in low performance apps, but don't have the simple "fwd/stop/rev" kind of interface that a DC gear motor does.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] BBC report on bird kills at towers, Dave Hachadorian|
|Next by Date:||FW: [TowerTalk] Re: BBC report on bird kills at towers, Jose M. Valdes R.|
|Previous by Thread:||Re: [TowerTalk] Gamma match, Jim Lux|
|Next by Thread:||[TowerTalk] Tower or ... caution flag?, David J. Windisch|
|Indexes:||[Date] [Thread] [Top] [All Lists]|