Maybe that's because the rotator manufacturer didn't say to pin it? (refer
to K7LXC's Law...) :-) Jerry K3BZ
----- Original Message -----
From: "Lew" <firstname.lastname@example.org>
Sent: Friday, August 29, 2003 12:55 AM
Subject: Re: [TowerTalk] 8 pin rotor quick disconnects
> Frank Mayer wrote:
> > Pin the mast and forget it..I have never had a mast failure after
> > it.. I had a Pr0-67C up for 5 years and now I use a Force 12 C-36XR (13
> > elements 40-10 on a 36 foot boom) with a Yaesu G-1000 DXA.
> My mast didn't fail when I pinned it through the Yaesu G-1000DXA,
> but the rotator sure did. Sounded like shaking a box of Cherrios after I
> got it out from under a DXE log-periodic. I shaved a M*M RC2800 to fit
> into a US Tower 572 and then put serious tight (tm) on the mast/rotator
> clamp. Works fine now except for some branches from a local fir tree
> that is begging for a Stihl solution.
> 73 and I remain,
> Lew W7EW/W7AT
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
> TowerTalk mailing list
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
TowerTalk mailing list