[Top] [All Lists]

Re: [TowerTalk] 8 pin rotor quick disconnects

To: <>, <>
Subject: Re: [TowerTalk] 8 pin rotor quick disconnects
From: "Jerry Keller" <>
Date: Fri, 29 Aug 2003 17:11:29 -0400
List-post: <>
OK, so my elbow-poking comes back into my own ribs... ow!
Instead of kidding around, I should have taken the time to read further in
the manual for the Yaesu G-800DXA rotator I'm in the process of installing.
In the illustration on page 11, it very clearly shows a long 9mm bolt
(supplied) going through the mast clamps AND through the mast.
Oh, well, live and learn. :-)  Jerry K3BZ

----- Original Message ----- 
From: <>
To: <>; <>
Sent: Friday, August 29, 2003 4:38 PM
Subject: Re: [TowerTalk] 8 pin rotor quick disconnects

> In a message dated 8/29/03 8:52:54 AM Pacific Daylight Time,
> writes:
> > Maybe that's because the rotator manufacturer didn't say to pin it?
> >  to K7LXC's Law...)
>     Actually the Yaesus come with a long bolt just for that purpose. The
> problem is that the mast clamps are easy to damage so they need all the
> they can get.
>     I've never been able to get an M2 Orion rotator mast clamp to stay
> for very long so I've started pinning them too. My opinion is that the
> stretch so no matter how secure the nuts are, the mast is eventually gonna
> :-(
> Cheers,
> Steve      K7LXC


See:  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>