I am starting one now in a small pickup truck aluminum tool box. I will
take pictures as I go.
Chuck W5PR
----- Original Message -----
From: "Jerry Keller" <k3bz@arrl.net>
To: "(Reflector) TowerTalk" <towertalk@contesting.com>
Sent: Friday, October 03, 2003 10:28 AM
Subject: Re: [TowerTalk] SPG Panel Box
For the first time, I didn't get many replies to an inquiry on TowerTalk.
Being a ham-with-no-design-talents, I was looking for a construction article
or some DIY plans for a Single Point Ground "box" to go outside at my
point-of-entry. I do pretty well at actually building stuff that someone
else designs, but apparently there haven't been many such construction
articles in books or magazines? At least I haven't found any. I know many
of you have built SPG "boxes", so how about a photo or two of yours? Please
send to me direct... k3bz@arrl.net ....the reflector doesn't allow
photos...and many thanks.
73, Jerry K3BZ
PS... I do thank those few that sent me replies... I'm hoping a few photos
will help me give your words more practical reality :-)
----- Original Message -----
From: Brad Nowak
To: Jerry Keller
Sent: Wednesday, October 01, 2003 2:48 PM
Subject: Re: [TowerTalk] SPG Panel Box
Polyphaser sells a copper panel that is mounted on particle board. This
is
suitable for indoor applications but I like you wished to keep all the
strike energy out of the house so I used a Nema 12 wall mount enclosure.
This comes with a sub plate inside that mounts to studs. The problem is
that it is a painted baked on finish so I ordered a sheet of copper cut to
my specifications from Onlinemetals.com. and mounted it directly to the
sub
plate. Worked out nice. You can purchase an enclosure in all sorts of
dimensions/options from most industrial electric distributors. Not cheap
but nice. From there just follow the advice from Polyphaser in their book
on lightning protection.
73,
Brad - n8snm
----- Original Message -----
From: "Jerry Keller" <k3bz@arrl.net>
To: "(Reflector) TowerTalk" <towertalk@contesting.com>
Sent: Wednesday, October 01, 2003 1:33 PM
Subject: [TowerTalk] SPG Panel Box
Can anyone direct me to magazine or book articles, or other sources of
plans
for building a basic Single-Point-Ground panel box for mounting outside at
my point-of-entry? Jerry K3BZ
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|