Towertalk
[Top] [All Lists]

[TowerTalk] Rohn 25G Hardware

To: "Tower Talk" <towertalk@contesting.com>
Subject: [TowerTalk] Rohn 25G Hardware
From: "Hal Kennedy" <halken@comcast.net>
Date: Mon, 20 Oct 2003 08:44:37 -0400
List-post: <mailto:towertalk@contesting.com>
FWIW, I demonstrated the hard way that the factory supplied Rohn 25G class 5
hardware is very adequate, and stronger than the tower legs.  I lost a guy
wire on a 25G tower and had it fall over.  The tower 'broke' (bent over 90
degrees) at the splice between two sections, with one leg in compression and
two legs in tension.  The tubing of the upper section leg in compression
collapsed and bent 90 degrees just about the splice.   The two legs in
compression pulled apart, via tearing the bolt holes open in the upper
section.  All four bolts (in the two legs) were still in-tact and still in
the holes in the lower section.  The upper section bolts holes had been torn
open down to the bottom of the legs - not pretty, but the bolts did great!
73,
Hal
N4GG


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>