|To:||david jordan <firstname.lastname@example.org>, gdaught6@Stanford.edu|
|Subject:||Re: [TowerTalk] Re: 40m beam with wires dangling down|
|From:||Jim Lux <email@example.com>|
|Date:||Wed, 05 Nov 2003 12:09:28 -0800|
At 02:54 PM 11/5/2003 -0500, david jordan wrote:
Yes, you would modify the stepper such that when the copper element inside the fiberglass tube reached full extention the copper tape would make a connection with the dangling wire.
Uhhh.. but then you wouldn't be able to adjust the element length in the loaded condition. You'd not be able to do all the cool stuff like tuning for environmental effects, swapping 180, etc.
What about vacuum relays and ow loss coils at the feedpoints of the elements? Seems like that would be a fairly simple solution, and you've already got some cabling going to the element for the motor control.
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] Re: 40m beam with wires dangling down, david jordan|
|Next by Date:||Re: [TowerTalk] Re: linear loading, Rick Karlquist|
|Previous by Thread:||Re: [TowerTalk] Re: 40m beam with wires dangling down, david jordan|
|Next by Thread:||Re: [TowerTalk] Re: 40m beam with wires dangling down, david jordan|
|Indexes:||[Date] [Thread] [Top] [All Lists]|